AUTHORIZATION
Stationary charging stations
Sungrow 11kW charging station, 3-phase, Type2 cable, 7m
In the warehouse: In stock
Delivery: 1–3 days
Power (kW): 11
Voltage (V): 230/400
Number of phases: 3
Current up to (A): 16
Current regulation: There is no
Cable length: 7
Connector type: Type2
Access to charging: Free, RFID, Application
Internet connection: WLAN, RS485
Dynamic Power Balance (DLB): No
OCPP protocol: It is
Defense: IP65
Power supply: 230-400V
Weight, g 3.8 g
Width 45 sm
Height 16 sm
Length 54 sm
Measure set
Article sung11-7
Vendor Sungrow
Vendor ID AC011E-01
Availability is available
Width 45 sm
Height 16 sm
Length 54 sm
Measure set
Article sung11-7
Vendor Sungrow
Vendor ID AC011E-01
Availability is available
User identification
Dynamic load management (DLM)
DLM response time
Compatible EVSE protocols
Energy measurement
Firmware update
RFID, VOOL APP
DLM¹ and dynamic phase management (DPM)¹
Under 50 ms¹
OCPP 1.6, OCPP 2.0²
Integrated
OTA, USB, CAN
EXTERNAL INTERFACES
Internet connection
External energy meter
Local device network
SAFETY
Residual current detection
Compliance
Electrical protection
Additional safety features
Integrated type A and B RCD
LVD, RoHS
Protection CLASS I, overvoltage category III
Relay contact diagnostics, self-check, thermal throttling
GENERAL SPECIFICATIONS
Dimensions (A x W x H)
Weight
Operating temperature
Enclosure environmental rating
Impact resistance
Standards
Standard warranty
Network standards
Network voltage
Charging options
Nominal power
EV connection
LTE, Wi-Fi (IEEE 802.11 b/g/n), Ethernet 10/100
Modbus RTU (RS485)
CAN
335 x 198 x 112 mm
5.5 kg
From -30 °C to +50 °C³
Outdoor use / IP55
IK10
EMCD 2014/30/EU, IEC 61851-1:2017, IEC 61851-21-2:2018, IEC 62955:2018
5 years
TN, IT
230 VAC / 400 VAC (±10%)
1 phase, 2 phases, 3 phases
22 kW / 32 A (11 kW / 16 A)
Type 2 tethered cable (6.5 m)
